Labconco Biological Safety Cabinets 34269 Series - Manual (Page 51)

Product Service 1-800-522-7658 45
Original instructions
C C h h a a p p t t e e r r 6 6 : :
M M a a i i n n t t a a i i n n i i n n g g t t h h e e C C a a b b i i n n e e t t
The common service operations necessary to maintain the biosafety cabinet
for peak performance are listed below.
Note: This manual covers operation and maintenance operations for the
owners/users of the Logic+ biosafety cabinets. Complete certification
procedures, service operations and specifications are published in a separate
publication Technical Manual: Purifier
® Logic ® + Biosafety Cabinets. This
manual is available from Labconco’s website: www.labconco.com . A
complete certifier service kit is available to qualified certifiers from
Labconco. Call Labconco’s Product Service Department at 800-821-5525 or
816-333-8811.
Do NOT contact blower wheel while still in motion.
NE PAS être en contact avec la roué du ventilateur tant qu’il est
en marche.
Routine Maintenance Schedule
Weekly
• Wipe down the interior surfaces of the cabinet with a suitable
disinfectant, or 70% ethanol, and allow to dry.
• Using an appropriate glass cleaner, or LabSolutions TM Glass &
Surface Wipes, Labconco part # 1570000; clean the sash and the
surface of the UV lamp, if so equipped.
• Operate the cabinet blower, noting the percent filter life remaining in
an operational log.
Monthly (or more often as required)
• Using a damp cloth, or LabSolutions Glass & Surface Wipes,
Labconco part # 1570000; clean the exterior surfaces of the cabinet,