Labconco Biological Safety Cabinets 34269 Series - Manual (Page 13)

Product Service 1-800-522-7658 7
Original instructions
C C h h a a p p t t e e r r 3 3 : :
G G e e t t t t i i n n g g S S t t a a r r t t e e d d
Now that the installation is properly prepared, you are ready to inspect,
install, and certify the Logic+ biosafety cabinet. This chapter covers how to:
• Unpack and move the biosafety cabinet.
• Install the cabinet.
• Connect the electrical supply source.
• Connect the service lines.
• Connect to an exhaust system (optional).
• Arrange certification of the biosafety cabinet.
• Install the microscope (optional – Scope-Ready package only).
• Connect the circulator (optional – Temp-Zone package only).
Tools required for installation the biosafety cabinet include two 1/2"
wrenches, a flat-blade screwdriver, a #2 Phillips screwdriver, and a
carpenter’s level.
Note: The biosafety cabinet models weigh between 400–700 lbs. (182-318
kg). The shipping pallet allows for lifting with a mechanical lift truck or
floor jack. If you must lift the product manually, use at least six (6) persons
and follow safe-lifting guidelines.