Konig Electronic IP baby monitor - Manual (Page 14)

ENGLISH
14
Connection Types
There are three types of network connection types possible between IP baby monitor and
your Smartphone App.
1) Local Area Network (LAN) Mode
Both IP baby monitor and your smartphone are connected to the same Wi-Fi Router.
Typical frame rate will be around VGA 640 x 480 15~20 fps.
2) Point to Point (P2P) Mode
IP baby monitor will establish a point to point network connection directly with the
smartphone.
Typical scenario will be that the IP baby monitor is installed at home or in the office and
the smartphone has a 3G/3.5G/4G internet connection. Typical frame rate will be around
VGA 640 x 480 10~15 fps.
3) Relay Mode
IP baby monitor and smartphone cannot establish a point to point network connection
link. IP baby monitor must send Audio/Video data to a relay server and the smartphone
will retrieve data from the relay server. In relay mode, there will be a limit on the video
download frame rate. Typical scenario will be that the IP baby monitor is installed at home
or in the office and the smartphone is using a Wi-Fi connection.
Remark:
• When using 3G/3.5G/4G to connect to uCare Cam, the App will use P2P mode.
If the smartphone download speed is too slow, the App will switch to relay mode. The user
can force the App to reconnect to IP baby monitor and it will try P2P mode again. To force
reconnect, press and hold the camera name on the Camera list. A pop-up menu will appear
with the option to “Reconnect”. Please click “Reconnect”.