Konig Electronic IP baby monitor - Manual (Page 12)

ENGLISH
12
Method 1: Scan for IP baby monitor in local intranet
1. Make sure your smartphone is connected to the same
router as your uCare Cam. Open up the Smartphone
App “uCare Cam” and click on the “Click here to
import installed Wi-Fi-Cam” at the top of the screen.
2. Click on “Search”.
3. You will see a list of UID’s that were found in your
local intranet (Figure XX).
4. Click on the UID you would like to add.
5. Please enter a Camera name (2 to 20 characters) and
the camera password. The default password is 0000.
Click “OK” at the bottom of the screen.
6. You will see the Camera name now in Camera List
view. It should indicate that the Camera is “Online”.
To connect to the Camera, please click on Camera
name. If the Camera is not “Online”, you may need to
force reconnect. To force reconnect, click and hold
on the Camera name. A pop-up window will give you
options to Reconnect, Edit, and Remove Camera. Click
on “Reconnect” then click on the Camera name once
it shows “Online”.
Method 2: Scan QR Code on the back of uCare Cam
1. Make sure your smartphone is connected to the internet. Open up the Smartphone App
“uCare Cam” and click on the “Click here to import installed Wi-Fi-Cam” at the top of
the screen.
2. Click on “QR Code”. You are required to have a QR code reader installed on your Android
phone. A popular QR code reader might be “QR Droid”.
3. You will see your smartphone camera live view. Face your smartphone camera towards the
QR code found on the back of the uCare Cam. Please make sure the QR code is clear and
fully viewable in the screen. Once the QR code has been detected, the App will display the
UID in the App window.
4. Please enter a Camera name (2 to 20 characters) and the camera password. The default
password is 0000. Click “OK” at the bottom of the screen.
5. You will see the Camera name now in the Camera List view. It should indicate that the
Camera is “Online”. To connect to the Camera, please click on the Camera name. If the
Camera is not “Online”, you may need to force reconnect. To force reconnect, click and
hold on the Camera name. A pop-up window will give you options to Reconnect, Edit, and
Remove Camera. Click on “Reconnect” then click on Camera name once it shows “Online”.