Konig Electronic IP baby monitor - Manual (Page 11)

ENGLISH
11
5. You will see the Camera name now in Camera List view. It should indicate that the Camera
is “Online”. To connect to the Camera, please click on the Camera name. If the Camera is
not “Online”, you may need to force reconnect. To force reconnect, click on the right arrow
and click on “Reconnect”. Click on the Camera name once it shows “Online”.
Method 3: Type in the 20 digit QR code
1. Make sure your smartphone is connected to the internet. Open up the Smartphone App
“uCare Cam” and click on the “+” at the top right of the screen.
2. Click in the “UID” field to enter typing mode.
3. Type in the 20 digit code exactly as printed underneath the QR code on the back of the
uCare Cam.
4. Please enter a Camera name (2 to 20 characters) and the camera password. The default
password is 0000. Click “Done” on the upper right of the screen.
5. You will see the Camera name now in the Camera List view. It should indicate that the
Camera is “Online”. To connect to the Camera, please click on Camera name. If the Camera
is not “Online”, you may need to force reconnect. To force reconnect, click on the right
arrow and click on “Reconnect”. Click on the Camera name once it shows “Online”.
G. Android – Add IP baby monitor (already connected to router) to App
There are three ways to add a IP baby monitor to the Camera List view if the IP baby monitor is
already connected to the internet. You can:
• Scan for IP baby monitor in local intranet
• Scan the QR code at back of IP baby monitor
• Type in 20 digit code