Hatteland Display 26 inch - HD 26T21 STD (Widescreen) - Manual (Page 6)

6
IND100131-28
Contents of package
Item Description Illustration
HA-SDM-2M
1 pcs of Standard DVI Signal Cable.
DVI-D 18+1P Male to DVI-D 18+1P Male Single Link - Length 2.0m
HA-VGA-2M-32
1 pcs of Standard VGA Signal Cable.
DSUB 15P Male to DSUB 15P Male - Length 2.0m
FS-CABLE EU
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
Note: Included in package for models with AC input.
EUR TYPE F
IEC
80099
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
Note: Included in package for models with AC input.
US TYPE B
IEC
MEDIA STD01
Documentation and Driver DVD/CD containing the user manual, including the Touch Screen
driver for units delivered with a factory mounted touch screen. For most recent drivers, please
visit “www.hatteland-display.com/archive”
In some cases (due to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit
instead.
Menu browser
for Microsoft®
Windows®
Operating Systems
Test Report
HD CMB SX1-A1 or
HD CMB SX1-A2
Model Dependent:
4 pcs of Key Hole Mounting Brackets for Console/Panel Mounting,
Anodized Aluminium/Stainless Steel.
The bracket kit is suitable for 12, 15, 17 and 19 inch units and is EN60945 Tested.
Note: Either -A1 or -A2 version may be delivered during Q4-2014 to Q3-2015
Reference: http://www.hatteland-display.com/mails/02_2015_ecn.html
-A1: Suitable for panel thickness 3.0 [0.12] to max: 12.00 [0.47] mm [inch]
-A2: Suitable for panel thickness 1.0 [0.04] to max: 12.75 [0.50] mm [inch]
HD CMB SX1-B1 or
HD CMB SX1-C1
Model Dependent:
Bracket Kit suitable for console/panel mounting which contains:
3 x Mounting Bracket for top, left and right side
1 x Mounting Bracket for bottom side (terminal/connector plate area)
8 x M5x16 screws
8 x C-Washers
HD CMB SX1-B1 = Suitable only for 24 inch units and is EN60945 Tested.
HD CMB SX1-C1 = Suitable only for 26 inch units and is EN60945 Tested.
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 (Phoenix 1961986) for DC Power In
2 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for RS-422 / RS-485 / SCOM / Buzzer Module
Refer to “Configuring Housing / Terminal Block Connector” section for usage.
Note: Location of module(s) may
differ between unit sizes
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Item Description Illustration
USB-218
1 pcs of Touch Screen Cable USB Type A to Type B.
Length Approx 1.8m.
Only included in package if model is equipped with factory mounted Touch Screen
For High Bright / Sunlight Readable models (12-24 inch) an EPDM sealing gasket for IP66
console mount is factory pre-mounted / included with delivery.
Details / Type number reference:
Surface: RAL9011, Glue: 3M9471LE, Thickness 2mm.
P006998-1 (12), P006997-1 (15), P007130-1 (17), P007131-1 (19), P007032-1 (24)
Package may also include: