Hatteland Display 26 inch - HD 26T21 STD (Widescreen) - Manual (Page 51)

51 User Controls
IND100064-42
OSD Menu Functions
Color Mode
Lets you adjust the color temperature (Kelvin degrees) of the image. This applies to the Source signal only.
OSD Menu overlay will be unaffected. Lower values make the image appear warmer, while higher values
will make it appear cooler. The contents of these submenus are listed below.
Illustration (does not appear in menu): The Kelvin color temperature scale (approximate and symbolic):
1800K 4000K 5500K 8000K 12000K 16000K
|---2---
Color Mode - Color Temperature
Settings as follows:
“9300K” = Cool, a blueish white.
“8000K” = Neutral, a white close to natural light.
“6500K” = Warm, a reddish white.
|--------3--------
Color Mode - Color Temperature - User *Available in “Full Mode” only
Allows individual adjustment of Red, Green and Blue color gains. The selected setting will
be preserved for each signal input (DVI/VGA)
Settings as follows:
“Red” = Adjust the Red Gain.
“Blue” = Adjust the Green Gain.
“Green” = Adjust the Blue Gain.
● Note: Value adjustable from 0 to 100. 50 is factory default.