Hanna Instruments HI 83208-2008 User Manual

Page 8

Date / Time

This option is used to set the instrument’s date and time.
Press Modify functional key to change the date/time.
Press the WX functional keys to highlight the value to be modified
(year, month, day, hour, minute or second). Use the keys to
change the value.
Press Accept functional key to confirm or ESC to return to the setup
without saving the new date or time.

Time format

Option: AM/PM or 24 hour.
Press the functional key to select the desired time format.

Date format

Press Modify functional key to change the Date Format.
Use the keys to select the desired format.
Press Accept functional key to confirm or ESC to return to the setup
menu without saving the new format.

Language

Press the corresponding functional key to change the option.
If the new selected language cannot be loaded, the previously
selected language will be reloaded.

Tutorial

Option: Enable or Disable.
If enabled this option will provide the user short guides, related to
the current screen.
Press the functional key to enable/disable the tutorial mode.

Beeper

Option: Enable or Disable.
When enabled, a short beep is heard every time a key is pressed.
A long beep alert sounds when the pressed key is not active or an
error condition is detected.
Press the functional key to enable/disable the beeper.

In the Setup mode the instrument’s parameters can be changed. Some parameters affect the measuring
sequence and others are general parameters that change the behavior or appearance of the instrument.
Press SETUP to enter the setup mode.
Press ESC or SETUP to return to the main screen.
A list of setup parameters will be displayed with currently
configured settings. Press HELP for additional information.
Press the

keys to select the parameter and select a

new value as follows:

Backlight

Values: 0 to 8.
Press Modify functional key to access the backlight value.
Use the WX functional keys or the keys to increase/
decrease the value.
Press Accept functional key to confirm or ESC to return to the setup
menu without saving the new value.

Contrast

Values: 0 to 20.
This option is used to set the display’s contrast.
Press Modify functional key to change the display’s contrast.
Use the WX functional keys or the keys to increase/
decrease the value.

Press Accept functional key to confirm the value or ESC to return to the
setup menu without saving the new value.

SETUP