Hall Research HR-4P - Manual (Page 14)

Model HR-4P
12
3.13 Time Delay
• Time delay’s can be added to configuration strings as needed. Delay’s can
from milliseconds to 255 minutes. Multiple delays can be entered if longer
times are required. Each of the minutes, seconds and milliseconds fields is
limited to 0 to 255.
• When done, the user clicks the Add button to append the command to the
existing user string to the existing user string as shown in Figure 10.
Figure 10 – Time Delay
3.14 Output
• If any of the units I/O is configured as an output, you can control that output
based on a specific input condition.
• Select the Output from the Action drop-down menu and pick a desired output
channel state, either ON or OFF.
• When done, the user clicks the Add button to append the command to the
existing user string as shown in Figure 11.
Figure 11 – Output