Hall Research HR-4P - Manual (Page 10)

Model HR-4P
8
3.7 Show Config
• Click the Show Config button to display the current configuration present in
the GUI. Figure 5 below shows an example of a unit’s configuration. All INPUT
Strings and IR Codes are available
• Configuration settings can be saved and loaded from disk by using the “FILE”
menu at the top of the main screen.
• Configuration settings can be uploaded into the HR-4P unit by clicking the
Upload button displayed on the left of the main screen.
• Configuration settings can be downloaded in the GUI by clicking the Download
button displayed on the left of the main screen.
Figure 5 – Sample Configuration Display
3.8 Download
• Click the Download button on the left of the Main screen to
retrieve the current configuration strings stored in a HR-4P unit
and into the GUI software.
• As the configuration screens are downloaded, the GUI interface will update
with the retrieved settings.
• If the configuration string for a specific condition needs to be viewed or
modified, you can click the Download Single button to the right of the
configuration text box as shown.
Note
Downloading or uploading user configuration strings is ONLY allowed
when the HR-4P unit is in the program mode (The power led is
blinking).