beautypg.com

Function introduction, 1 fy-41ap lite single module function – FeiYu Tech FY-41AP Lite User Manual

Page 5

background image

Guilin Feiyu Electronic Technology Co., Ltd.

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]

Page 3

Power Manager Module

FY-41AP Lite can connect power manager module which is integrated with current

sensor module and Voltage-Regulating module. Current Sensor is used to check voltage,

Amp draw. The integrated Voltage-Regulating module provides stable +12V to FPV video

camera and video transmitter.

Altitude Control

Altitude control is achieved using a high sensitivity barometric sensor which

measures relative height. Altitude is fixed via elevator servo control and throttle

management.

Heading Control

Under the condition of without GPS module, heading control is achieved by the

inertial device. Both the aileron & rudder servo is used to control flight heading. But it will t

influence of wind deviation from the original route.

Under the condition of connect to the GPS module, GPS data is used to automatically

correct heading even in windy conditions.

Speed Control

Under the condition of without airspeed sensor but connect to the GPS module, GPS

module provide the speed and altitude information for the throttle control to achieve the

control of the speed.

When connect to the airspeed sensor, the airspeed information will available and use

for controlling the throttle, and the speed control is more reliable and accurate.


2. Function Introduction

2.1 FY-41AP Lite Single Module Function

Note:

Not use the GPS module

Activated Mode

In this mode, the FY-41AP Lite auto stabilization is turned off.

The aircraft is completely under pilot control.

Stabilized Mode

Level flight is automatically maintained, making flight simple,

especially for beginners. If a pilot feels the plane is out of control, simply reduce input

control and the plane will automatically recover level flight.