FeiYu Tech FY-41AP Lite - Manual (Page 17)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 15
Flight mode instruction
Name Introduction Name Introduction
RC Deactivated mode RTL Return to home
3D 3DAerobatic Flight ADH
Fixed altitude &
Heading lock Mode
ABM Stable mode ACM Circle mode
8. FY-41AP Lite Setting
There are two ways to set the FY-41AP Lite, one is via remote control and OSD
overlay menu settings. Another solution is connected via USB cable to the computer by
using the setting software to set up. Here we introduce the use of these two methods.
Method one: Setting FY-41AP Lite via remote control and OSD overlay
menu
1 ) Activate the OSD setup menu: switch "ABM" to the "3D mode" 6 times in SW1,
between two switching it has to be less than 3 seconds, the process is as follows:
ABM → 3D mode →ABM →3D mode → ABM → 3D mode → ABM → 3D mode →ABM
→ 3D mode →ABM→ 3D mode. This will activate OSD setup menu interface.
2 ) Move Elevator stick to the project you want to set.
3 ) Move aileron stick to the project you want to set.
4 ) Please put elevator stick to SAVE, after your setting. Through the stick of ailerons
carried out to save the action, when saving, "SAVE" will flicker for two seconds, the end
of the flashing, been saved successfully.