beautypg.com

Logic ground – EXFO QA-805 User Manual

Page 15

background image

Introduction

QualityAssurer 805

7

Physical Description of QA-805 Unit

Rear FRU Physical Layout

Logic Ground

Logic ground is used as reference for low voltage electronics and is
isolated from the chassis/shelf ground and 48 V power lines. For EMI/EMC
purposes, it might be needed to connect the logic ground and shelf ground
together.

To connect both grounds, a screw with a conductive metal washer is
installed in this location (GND) as shown in the following picture. To
disconnect, remove this screw.