EXFO MaxTester Series - Manual (Page 95)

Managing Data
MaxTester Series 85
Transferring Data via Bluetooth
Pairing Devices with Your Unit
After the computer that you intend to use has been properly configured,
you can pair (associate) it with your unit.
Once a device has been paired successfully with your unit, it remains
paired (that is, ready for data transfer) as long as you do not remove the
pairing yourself. Each time you turn on your unit, or resume your work after
the unit has switched to suspend mode, the unit will try to establish a
connection with the paired devices automatically.
The next time you open the Bluetooth configuration window, only the
devices that have already been paired will be shown by default. However,
if you prefer, you can scan for all of the devices available in the area (paired
and not paired).
If no Bluetooth devices have been paired yet (or if all pairings have been
removed), you will see an empty list when you open the configuration
window. You can also scan for all available devices.