EXFO MaxTester Series - Manual (Page 69)

Setting Up Your Unit
MaxTester Series 59
Selecting the Startup Application
Selecting the Startup Application
The first time you start your unit, the Home screen is displayed. However,
you can configure your unit to automatically start in any of the available
applications.
You can also configure your unit to start services such as the VNC server
(for remote control). For more information on remote control with VNC,
see Accessing Your Unit Remotely on page 109.
The selected application and service will start automatically the next time
you turn on your unit after a shutdown (not after resuming from the
suspend mode, and not after updating the applications). For more
information, see Turning On or Off the Unit on page 21.
To select a startup application:
1. From the Home screen, tap Configuration.
2. Tap Startup Application.