beautypg.com

7 inspecting fibers with a probe, Inspecting fibers with a probe, 7inspecting fibers with a probe – EXFO MaxTester Series User Manual

Page 89: Mportant

background image

MaxTester Series

79

7

Inspecting Fibers with a Probe

The fiber inspection probe (FIP) is used to find dirty or damaged
connectors by displaying an enlarged view of the connector surface. You
can connect an FIP to your unit to view fiber ends.

Fiber inspections are made using the ConnectorMax2 application. For
more information, refer to the ConnectorMax2 online help. You can access
this online help directly from the Home screen (see Accessing the Online
Documentation on page 63
), or by tapping the

button from the

ConnectorMax2 application.

To inspect fibers with a probe:
1.
Connect the probe to one of the USB ports on the top panel of your

unit.

2. From the Home screen, tap the ConnectorMax2 icon to open the

application.

I

MPORTANT

Only the probes of the FIP-400B series are supported on your unit.