EXFO MaxTester Series - Manual (Page 64)

Setting Up Your Unit
54 MaxTester Series
Configuring the Power Management Options
Configuring the Power Management Options
When you do not use the unit for a while, the display may be dimmed to
save power. You can also configure the unit to go into suspend (sleep)
mode after the specified duration has expired (see Turning On or Off the
Unit on page 21).
For these actions, you can set idle durations for AC adapter/charger and
battery operation. The values that you set are kept in memory even when
you turn the unit off.
Note: When the unit is in suspend mode and powered by battery, to save battery
power, the unit will switch from suspend to shutdown automatically after
four hours.
Note: When the backlight is dimmed, the unit operation is not interrupted. Touch
anywhere on the screen to return to normal operation.
I
MPORTANT
The sleep delay (time before the unit switches to suspend mode)
will only be taken into account once the dim delay (time before the
display is dimmed) has expired. For example, if the dim delay is set
to 5 minutes and the sleep delay is set to 10 minutes, the unit will
switch to suspend mode (sleep) after 15 minutes. If you set the dim
delay to Never, the sleep delay will also be set to Never
automatically.