EXFO MaxTester MAX-630 - Manual (Page 78)

Running DSL/IP Tests and Viewing Results
72 MAX-630
VoIP Call
VoIP Call
The VoIP Call feature allows you to place and receive
VoIP calls while displaying phone numbers, call status,
and statistics.

Enter Address displays the dialed number
entered from the editor screen or selected from
the Recent Dialed Numbers list or Phone Book.
When Enter Address is selected, it opens the
alphanumeric keypad to enter a SIP Address.
If the call is already connected after Enter
Address is selected, it opens the
DTMF/Touch-Tone Keypad.

Dial/Hang Up button allows you to dial the selected or entered
number, or disconnect the dialed call.

Touch-Tone Keypad button opens the DTMF keypad. If the call is not in
progress or connected, this button is disabled.

Phone Book button opens a page where you can enter a new address,
access Recently Dialed numbers, or Select From Phone Book.

Volume button adjusts the speaker volume.

Threshold Settings button opens a new page that allows you to set the
VoIP Call threshold parameters.

Mute/Unmute Speaker button changes the speaker status.

Result displays Call Information such as the VoIP Status, number and
Codec the call is connected to, duration, and the pass/fail status of the
test/call.