EXFO MaxTester MAX-630 - Manual (Page 50)

Setting Up DSL/IP Tests
44 MAX-630
Test Setup

Communication Channel is the parameter based on either UDP or
TCP.

Controller Setup button opens a new page that allows you to set the
required VoIP parameters for the unit.

Proxy Setup button opens a new page that allows you to set
parameters for the Proxy.
To configure test setup values:
1. Press the up/down arrow keys to select the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
5. If you make any changes to the parameter values, press the on-screen
function keys to save or cancel your input.
Controller Setup
The Controller is the local VoIP connection for your
MaxTester. The Controller Setup Info page allows
you to set the following VoIP parameters for your unit:

User Name allows you to enter alphanumeric
characters in this field using the editor screen to
create a name.

Signalling Port (read only) displays a fixed
numeric value of the signalling port used to
establish an IP network session.

Address Format (read only) displays DNS Name.

Domain (read only) displays the domain name
www.exfo.com.