EXFO MaxTester MAX-630 - Manual (Page 36)

Setting Up the MAX-630
30 MAX-630
Upload Setup
The following parameters are available only when Access Mode is Static.

IP Address is the address for the unit that is actively connected to
your network or the internet at the time of login.

Gateway is the IP address of the default gateway.

Subnet Mask is the network address used to identify if the IP
address is within the same wide area network.

DNS1 is the address of the primary domain name server to be used
by the unit. If DNS is unavailable, enter 0.0.0.0.

DNS2 is the address of the secondary domain name server to be
used by the unit. If DNS is unavailable, enter 0.0.0.0.

Restore Default button allows you to reset the entries to the default
settings.
To configure the setup options:
1. Press the up/down arrows to select the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.