EXFO FTB-200 v2 Compact Modular Platform User Manual

Page 124

Text mode
Original mode

Inspecting Fibers with a Probe

114

FTB-200 v2

2. From the Main Menu, tap Probe.

3. If the unit prompts you to select an application, tap the button

corresponding to the probe that you want to use to start the
corresponding application.

Note: If the ConnectorMax2 application is not installed on your unit, the

ConnectorMax application will start automatically, enabling you to work
with the probes of the FIP-400 series. If you also wish to be able to work
with probes of the FIP-400B series, you will need to install the most recent
ConnectorMax kit.

Note: You can access the online help by tapping the

button from the

ConnectorMax or ConnectorMax2 application.