beautypg.com

Eurocom X3 R2 User Manual

Page 202

background image

Modules

7 - 8 Setting Up SATA RAID or AHCI Mode

7

20. You should select two identical disks to form your RAID volume.
21. If you have selected RAID0 (Stripe) then you can adjust the “Strip Size” to your

requirements.

22. If you have selected Recovery then you can adjust the Synchronization to “On

Request” or “Continuous”.

23. Go to Create Volume and press .
24. The RAID volume will then be created and the RAID information will be displayed

under Intel(R) Rapid Storage Technology (in the Advanced menu).

Figure 7 - 4

Created RAID

Information

(Advanced > Intel(R)

Rapid Storage

Technology)