Eurocom Monster - Manual (Page 152)

Modules & Options
7 - 38 Bluetooth & WLAN Combo Module
7
Intel Bluetooth Combo Driver Installation
Note this driver is required only for the Intel combo Bluetooth and WLAN module
only.
1. Before installing the driver make sure the Bluetooth module is powered
on (use Fn + F12 key combination), then insert the Device Drivers & Utili-
ties + User’s Manual disc into an attached DVD drive. If a Found New
Hardware window appears, click Cancel in all windows that appear, and
then proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 4.Install Combo BT Driver > Yes.
4. Click Next > Next.
5. Click the button to accept the license and click Next.
6. Click Next > Finish.
7. See over for configuration instructions.
Note that, at the time of going to press, Intel® Centrino® Wireless-N 2230 and
Advanced-N 6235 WLAN & Bluetooth combo modules use the standard Bluetooth
configuration in Windows 7 (see
“Standard Bluetooth Configuration in Windows
7” on page 7 - 39 ).

High Speed Bluetooth
Data Transfer
The Combination Wire-
less LAN & Bluetooth
module supports high
speed data transfer. How-
ever to achieve such
transfer speeds, both de-
vices must support
high speed data trans-
fer.
To obtain high speed
data transfer make sure
that both the WLAN and
Bluetooth modules are
powered on.
Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.