Eurocom Monster User Manual
Page 126
Modules & Options
7 - 12 Wireless LAN Module
7
3rd Party 802.11b/g/n Driver Installation (for Combo Modules)
If you see the message “Found New Hardware” click Cancel to close the window.
1.
Make sure the module is powered on, and then insert the Device Drivers
& Utilities + User’s Manual disc into an attached DVD drive.
2.
Click
Option Drivers
(button).
3. Click 2.Install WLAN Driver > Yes.
4. Click Next (if a prompt appears to ask you to turn the Bluetooth power on,
press the Fn + F12 key combination to do so, otherwise the driver will not
be installed).
5. Click Finish to restart the computer (see sidebar for important information).
Note: The operating system is the default setting for Wireless LAN control in Win-
dows (see page
).
WLAN & Bluetooth
V4.0 Combo Driver
Important
Information
The driver for the WLAN &
Bluetooth V4.0 Combo
module will install both the
WLAN & Bluetooth drivers
at the same time, and
therefore it is not neces-
sary to install the Blue-
tooth driver separately (a
warning message will ap-
pear if you attempt to install
the Bluetooth driver).
The driver for the WLAN &
Bluetooth V4.0 Combo
module uses the standard
Windows Bluetooth config-
uration settings (see
“Standard Bluetooth
Configuration in Win-
dows 7” on page 7 - 39
).