Elenco Circuit Maker Sound Plus 200 - Manual (Page 3)

-2-
How to Use Circuit Maker Sound Plus 200
Circuit Maker Sound Plus 200 uses building
blocks with snaps to build the different
electrical and electronic circuits in the projects.
Each block has a function: there are switch
blocks, light blocks, battery blocks, different
length wire blocks, etc. These blocks are
different colors and have numbers on them so
that you can easily identify them. The blocks
you will be using are shown as color symbols
with level numbers next to them, allowing you
to easily snap them together to form a circuit.
For Example:
This is the switch block which is green and has
the marking on it. The part symbols in this
booklet may not exactly match the appearance
of the actual parts, but will clearly identify them.
This is a wire block which is blue and comes
in different wire lengths.
This one has the number , , , ,
or on it depending on the length of the wire
connection required.
There is also a 1-snap wire that is used as a
spacer or for interconnection between different
layers.
You need a power source to build each circuit.
This is labeled and requires three (3) 1.5V
“AA” batteries (not included).
A large clear plastic base grid is included with
this kit to help keep the circuit blocks properly
spaced. You will see evenly spaced posts that
the different blocks snap into. The base has
rows labeled A-G and columns labeled 1-10.
Next to each part in every circuit drawing is a
small number in black. This tells you which
level the component is placed at. Place all
parts on level 1 first, then all of the parts on
level 2, then all of the parts on level 3, etc.
Some circuits use the jumper wires to make
unusual connections. Just clip them to the
metal snaps or as indicated.
Note: While building the projects, be careful
not to accidentally make a direct connection
across the battery holder (a “short circuit”),
as this may damage and/or quickly drain the
batteries.
S2
2 3 4 5
6
B3
CM-200_Manual_031914.qxp_CM-200_Manual_031914 4/2/14 12:04 PM Page 3