Datalogic Scanning QUICKSCAN QD2100 - Manual (Page 39)

Scanning Features
Product Reference Guide 31
Stand Mode Triggered Timeout
This feature specifies the time to remain in Trigger Single mode after the trigger is pulled
while in Stand Mode .
NOTE
This timeout is only used when the Scan Mode is configured as Stand
Mode .
ENTER/EXIT PROGRAMMING MODE
Stand Mode Triggered Timeout = 0.5 Seconds
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Stand Mode Triggered Timeout = 4 Seconds
DEFAULT