Default, Good read: when to indicate – Datalogic Scanning QUICKSCAN QD2100 User Manual
Page 30
General Features
22
QuickScan® QD2100
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash its green
LED) upon successfully reading a barcode. Choices are:
•
Good Read = Indicate after decode
•
Good Read = Indicate after transmit
•
Good Read = Indicate after CTS goes inactive, then active
NOTE
This option, which uses CTS, is only valid for RS-232
interfaces.
ENTER/EXIT PROGRAMMING MODE
Indicate Good Read = After Decode
Indicate Good Read = After Transmit
Indicate Good Read = After CTS Goes Inactive, Then Active
DEFAULT