Dream Property DM7020 - Manual (Page 63)

- 63 -
43.6. Dreambox resetting to factory defaults (flash erase)
Your Dreambox is now flashed with a new image (Software).
Click on the Exit-Button to close DreamUp.
Disconnect the Mainspowercord from the Dreambox.
Wait at least 30 seconds.
Plug in the Coax cable first, then the Scartcable and all other cables.
Turn on the TV and set it to AV
Plug in NOW the Mainspowercord.
As soon as you see the Dream-Logo on the TV-Screen, press the Channel-Up-Button at the Front of
the Dreambox. Hold it down until you see
"
flash erase
"
inside the LCD and then release it.
Your Dreambox will be set to factory defaults.
44. Dreambox Hardware reset
To make a hardware reset, press all three Buttons at the same Time.