Dream Property DM7020 - Manual (Page 49)

- 49 -
39. Recording a movie (Timer recording)
Attention: Timer recording is working in Standby-Mode and in Deep-Standby-Mode.
Open a Service list using the Navigation-Buttons up or
down or pressing the TV-Button. Select a service you
want to program into the Timer. Watch this service for
a couple of seconds until the red EPG dot in the
Infobar appears. Remember, not every service
provides EPG Information’s. Press the red Option-
Button. Choose an event and press the green
Option-Button to add it to the Timer.
The Timer Edit window appears.
Repeated Timer:
Set a check to enable this Event to record for a couple
of days or the whole week.
You can change the starting and ending Time for this
event by navigating to its desired fields. Type in the
new Time with the Numeric-Keyboard.
Navigate to the Dropdown list
“
record DVR” to change
the record method.
Possible methods are:
Switch - the Timer switches to this event. Record DVR
- the Timer records this event. Ngrab - the Timer
records to a Ngrab PC.
Press the green Option-Button to apply.
The Event will be marked as a Timer event in the
Servicelist. Press the EXIT-Button to exit the
Servicelist.
To verify a Timer event, press the MENU-Button to
enter the OSD-Mainmenu, go to (9) Timer. The Timer
list appears.