Dream Property DM7020 - Manual (Page 52)

- 52 -
43. DreamUp - Software upgrade
!!!! Very important, please read this passage completely, before starting upgrading !!!!
DreamUp and the Images (Software) for the DM7020S are available at our Website
www.dm7020.de .
Remove all cables from the Dreambox.
Connect only the serial and the Patchcable.
The Mainspowercord is disconnected.
You need a Windows PC with a serial port (COM1 or COM2) and an Ethernet card. Connect the
Ethernet card with the Dreambox Communication port using a Crossover Patchcable. Connect the serial
ports with a serial nullmodem cable.
How to figure out the IP-Address in Windows (W98,W2K,XP) :
Click Start -> Run -> type in
"
Command
"
-> press Return.
A Dosbox opens. Type at the Dosprompt
"
ipconfig /all
"
and press Return. The IP-Address will be listed. If
you have more than one Ethernet adapter listed, then take the first adapter. If you don
’
t see an IP-
Address, maybe you have no Ethernet card installed or configured. Refer to Windows Help or consult a
Technician for assistance.
Note the IP-Address and Subnetmask.