Dream Property DM7020 - Manual (Page 5)

- 5 -
3. Description Frontview
3.1. CI-Slot
Plug in here any CI- Module of your choice.
3.2. Compact Flash Slot
The Compact Flash Slot is meant to hold a Compact Flash Module. If you want to use a CF-Module,
shut down your Dreambox by using the Deep-Standby-Mode. Plug in carefully your CF-Module into the
Compact Flash Slot. The CF-Module is recognized by the System as a hard disk. To access the
Compact Flash Module, choose the File-Mode in the OSD-Main menu. Sometimes it is necessary to
format your CF-Module via the OSD-Menu.
See passage Hard Disk Setup.
3.3. Smartcard Reader
Insert your Dreamcrypt Smartcard with the golden chip down and forward into one of the Smartcard
Reader.
Dreamcrypt is a trademark of Dream-Multimedia-TV GmbH.
3.4. Remote sensor
The Remote sensor receives the infrared signals from the Dream Remote Control.
3.5. Channel up/down
The channel buttons at the Front of your Dreambox switch the TV or Radio channels up and down. To
initialize the
"
Flash Erase
"
hold down the channel up button. Please refer to Dreambox factory settings
(flash erase).
3.6. LC-Display
The LC-Display shows all major Information for the selected service.
3.7. Power-Button
The Power-Button switches your Dreambox off and on.