Dream Property DM7020 - Manual (Page 31)

- 31 -
32. UHF Modulator
Press the MENU-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (3) System Settings -> (3) UHF Modulator.
Connect your TV set with an appropriate Coax
cable to the UHF-Output of your Dreambox.
Start the scan on your TV set. The UHF Modulator
is set to channel 36 by default. If your VCR has the
same channel, you can change this value.
If you want, you can change these values with the
Navigation-Buttons and the OK-Button.
Save your Settings with the green Options-Button.