50 hour service, Change engine oil and filter (rt16) – Ditch Witch RT Line User Manual
Page 89
Service - 88
RT12/RT16/RT20/RT24 Operator’s Manual
50 Hour Service
CMW
50 Hour Service
Change Engine Oil and Filter
(RT16)
Change engine oil and filter every 50 hours.
1.
Drain at plug (2) while oil is still warm.
2.
Replace plug.
3.
Change oil filter (3).
4.
Slowly add GEO at fill cap (1) until level rises
to FULL mark on dipstick. Tighten dipstick.
Location
Task
Notes
Engine
Change engine oil and filter
RT16 only, GEO
IMPORTANT: Engine oil capacity with filter
change is 57.5 oz (1.7 L). Do not overfill.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)