Check rear tire pressures, Check lug nut torque, Check parking brake operation – Ditch Witch RT Line User Manual
Page 83
Service - 82
RT12/RT16/RT20/RT24 Operator’s Manual
Each Use
CMW
Check Rear Tire Pressures
Check rear tire pressures before each use.
Maintain pressure at 15 psi (1.0 bar) for bar lug
tires or 22 psi (1.5 bar) for turf tires.
Check Lug Nut Torque
Check wheel lug nut torque before each use.
Tighten to 85 ft•lb (115 N•m).
Check Parking Brake Operation
Check parking brake operation before each use.
To engage parking brake, move lever to the right.
To disengage parking brake, move lever left to
notch.
IMPORTANT:
•
Move unit slightly to ensure parking
brake pins are engaged.
•
It might be necessary to move unit
slightly to disengage parking brake.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)