Ditch Witch RT Line - Manual (Page 4)

RT12/RT16/RT20/RT24 Operator’s Manual
Overview - 3
Intended Use
CMW
Intended Use
The RT12, RT16, RT20, and RT24 pedestrian trenchers are designed to install buried cable and pipe to
depths of 48” (1220 mm) and widths of 8” (200 mm). These units are intended for operation in ambient
temperatures from 20° to 115°F (-7° to 46°C). Use in any other way is considered contrary to the intended
use.
RT12, RT16, RT20, and RT24 units should be used with genuine Ditch Witch chain, teeth, and sprockets.
They should be operated, serviced, and repaired only by persons familiar with their particular
characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
Unit Components
1. Control console
2. Engine
3. Digging boom and chain
4. Trail wheel