Ditch Witch JT1220 - Manual (Page 24)

JT1220 Mach 1 Operator’s Manual
Controls - 23
Set-Up Console
CMW
2. Cold start wait indicator Lights when intake air pre-
heater is operating.
Wait until light goes off before
starting engine.
3. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT:
• Alarm sounds if key is in run
position, but engine is not
running.
• Restart engine with ignition switch
after it has been turned off with
remote engine stop switch.
• If wrenches are engaged when
engine is stopped with ignition
switch, wrenches will release and
then engage when unit is started.
4. Left track switch To move forward, press top.
To move backward, press
bottom.
IMPORTANT: Use track switches only
if tethered control is inoperable.
5. Right track switch To move forward, press top.
To move backward, press
bottom.
IMPORTANT: Use track switches only
if tethered control is inoperable.
Item Description Notes
c00ic147h.eps
c00ic148h.eps