Delta CS24D - Manual (Page 21)

21
7.4 CS24D Options Summary
In addition to the Setup Wizard, options can
also be viewed and changed using the
Sensor Options screen under the Settings
menu.
Once parameters are set, they can be
downloaded to the sensor by pressing on the
OK or Apply buttons (OK also exits the
screen). Pressing Cancel will exit with
changing sensor settings.
The chart below shows the configuration
parameters for the CS24D.
Configuration Parameter Range Default Setting
Sort Mode Sets sorting algorithm
Closest Color,
Closest Match,
Unique Match
Closest Match
Error Limit Sets error threshold limit for match 0 to 65,535 5,000
Average
Sets number of readings to be
averaged by sensor (1ms/avg)
1 to 4096 64
Stretch
Outputs (1) Sets minimum output on-time when
a match condition is detected
0 to 65,535 ms 0
See Optimizing Section for more information on the parameters listed below
Optimization Sets sorting algorithm
Color Only,
Color plus Intensity,
Optimized
Color plus Intensity
Weighting
Factors Sets Weighting Factors used to
optimize sorting performance
(4) X 0 to 3
Red=1.0, Green=0.6,
Blue=1.6, Intensity=0.8
Notes:
1. When both Hold Input and Stretch Output are used, outputs will remain ON for the longer of the
Hold time or the Stretch time. (See section 4.2 for Hold Input information).
2. Sensor is always in Run mode, except:
a) when in Teach mode (Teach Mode input ON or Teach selected via ColorSense program, or
b) when operation temporarily suspended during startup or when parameters are being
downloaded and sensor is saving them to FLASH memory.