Delta CS24D - Manual (Page 17)

17
5.5 Saving Teach Data
Using the Sort Editor screen in the ColorSense program, Teach data can be uploaded from the sensor,
downloaded to sensor, read from a file, and saved to a file. (The Teach data can also be modified using
this screen; however, this is for advanced applications and care must be taken to prevent degradation of
the sensor performance).
To access this function, select the Sort Editor screen from
the Tools menu. Next, press the Upload from Sensor icon
to read the Teach data from the CS24D sensor.
To save Teach data to a file, press the Save to File icon.
Choose a file name and directory and press Save.
To transfer previously saved Teach data to a CS24D sensor,
press the Read from File icon to read the Teach data, then
the Download to Sensor icon. Note: this will overwrite
current Teach data in the CS24D. Be sure to save any
data first if it will be needed again.
The ability to save and retrieve Teach data can be of great
benefit if multiple sets of target colors are run on the same line.
However, due to differences from sensor to sensor, Teach data
from one CS24D should not be used with another CS24D.
5.6 CS24D LED Operation Summary
In Teach mode, the Output LEDs show the output being
taught, not the actual output state. The output LEDs use binary
coding to indicate which channel is active. The following
chart shows the operation of the indicator LEDs on the CS24D.
Condition RUN LED Output LEDs
No Power Off Off
Run mode, No Match Steady Blue ALL Off
Run mode, Match Steady Blue Steady Green shows Match Output
Teach mode, No Output Selected Blinking Blue ALL Off
Teach mode, Output Selected, No
Teach commands Blinking Blue Blinking Green shows Selected Sort Output
Teach mode, 1 - 7 Teach commands Off Blinking Green shows Selected Sort Output
Teach mode, 8 Teach commands Blinking Blue Steady Green shows Taught Sort Output
(The blink rate of the LEDs is about 2 times per second).