DaySequerra iLC2ST - Manual (Page 31)

iLC2ST User Manual
31
Remote Dashboard Configuration
Figure 14. Un-configured settings tab
Network Settings: Enter the IP address of the iLC2ST unit to be monitored. The IP address can be
found on the unit by navigating to the SYSTEM MENU, then NETWORK. For more details, see the
networking section of this manual. The UDP port should remain set at 44600.
Data Collection: Configures how often, in milliseconds, the application will poll iLC2ST for its readings.
Data Logging: Specifies the location for storing log files. This path may be local or on a network share
that the active Windows user has permission to write to.
Communication Log: Enables a diagnostics log to help troubleshoot any communication issues. This
data will be helpful to DaySequerra support staff in diagnosing any communication problems.
Data Log Options: Allows certain data fields to be captured to the log file. If the log files grow too big, it
may be helpful to disable any data that is not important to the immediate operation: