DaySequerra iLC2ST - Manual (Page 11)

iLC2ST User Manual
11
Work Cited
1. Fletcher, H. & Munson, W. A. (1933). Loudness, its Definition, Measurement, and Calculation.
2. Allen, J (2010 May 20). Nonlinear Cochlear Signal Processing.
3. Johnston, J. (2006). Loudness Tutorial.
4. Jones, B. L. & Torick, E. L. (1982). A New Loudness Indicator for Use in Broadcasting.
5. Nielsen, S. H. & Skovenborg, E. (2004). Evaluation of Different Loudness Models with Music
and Speech Material.
Installation
Immediately upon receiving your ILC2ST, please make a careful inspection for any shipping damage. If
damage is found or suspected, please notify the carrier at once and then contact your dealer. ILC2ST is
shipped in one carton, which contains: the ILC2ST unit and two NEMA5-15P to IEC320 C13 AC power
cables.
We strongly encourage you to save the shipping carton and shipping materials supplied with your
ILC2ST. They are specially designed to properly protect your ILC2ST, and in the event that you need to
return it for service, only these OEM shipping materials can ensure its safe return to our factory.
We provide a limited 1-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
www.daysequerra.com .
Each Leq(x) revision results in a different level of correlation between the objective measure and
the human listener’s assessment of loudness. The lowest mean error score was achieved by the
Neural Loudness Measure