Chicago Gaming Galactix - Manual (Page 2)

2
1. Safety Notices
The following safety instructions apply to all game operators. We recommend that you
read this page before setting-up GalacTix. Use the following safety guidelines to help
protect the system from potential damage and to ensure your personal safety.
• GalacTix will function at either 115V or 230V. The location of the voltage switch can
be found on Page 8.
• If operating at 230V, the operator must use a CE certified power cord rated for 250V,
5A.
• To help prevent electric shock, plug the system power cables into properly grounded
power sources. These cables are equipped with 3-prong plugs to help ensure proper
grounding.
Do not use adapter plugs or remove the grounding prong from a cable. If you must
use an extension cable, use a 3-wire cable with properly grounded plugs.
• Do not spill food or liquid on your system.
• Do not push any objects into the openings of the system. Doing so can cause fire or
electric shock by shorting out interior components.
• Keep your game far away from radiators and heat sources.
• Do not block cooling vents.
• Before working on the machine be sure to unplug it.
• Be sure to use fuses that meet the specified rating. (5A, 250V Fast-blow) Using
fuses exceeding the specified rating can cause a fire and electrical shock.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
FCC Compliance
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own expense.