Bonaire Touchpad Control (LV) - Tekelek - Manual (Page 8)

Touch Pad Control
Navigating the Controls
TEK600 Series Control Page 8
SETUP
To view the SETUP options available, press the touch pad anywhere
within the SETUP area. The available functions are:
• PGRM – Program setup allows you to create a timed program to
start and stop the air conditioner. There are 4 period programs
available requiring a minimum of 2 to be set. The program option
will only function for 24 hours and then the unit will stop.
• CLOCK – Setting the time
• REVIEW – Pressing the review button will automatically step the
control through the timer programs set.
RESETTING the Touch Pad Control.
Resetting the Touch Pad Control will return the
Touch Pad to its default settings for all
configuration and program options.
This function does not reset the cooler.
To reset the Touch Pad Control a number of
unseen icons will need to be pressed.
Step 1 Ensure the control is turned OFF.
Step 2 Press the ZONE 4 icon until a triple BEEP
followed by single BEEP is heard.
Step 3 In quick succession press COOL, CANCEL,
FINISH and THERM icons.
All the icons on the screen will now light up. They will slowly disappear one by one. Once all the icons have cleared it
will take approximately 1 minute for the control to return to an operating mode. The time will be displayed when the
RESET is complete.
If unsuccessful restart from STEP 1.
Press and wait
for a buzz
followed by a
beep