Bonaire Touchpad Control (LV) - Tekelek - Manual (Page 7)

Touch Pad Control
Navigating the Controls
TEK600 Series Control Page 7
Touch Pad Functions
ON / OFF
When pressing the ON / OFF button to turn the unit on, the touch pad
control will return to the last used setting.
APPLIANCE
When unit is turned on the last used appliance will be activated. There
is the possibility of having an Ultra High Efficiency gas fired central
heater operated from the same control.
Press any area within the Appliance area and if there is a heater fitted
the option will display COOL or HEAT. Press the required product.
After 3 flashes the selection will be accepted.
MODE
To view the MODE options available press the touch pad anywhere
within the MODE area. The available functions for COOL (Evaporative
Air Conditioning) are:
• COOL - Fan and Pump in manual mode. This means the fan
can be adjusted manually via the UP / DOWN arrows.
• BOOST - The fan will operate at maximum speed.
• PGRM - The unit can be set up in Program Mode to turn the
unit ON and OFF in the desire mode operation. Program mode
will operate for a 24-hour period from the moment it is activated.
• FAN - Fan only in manual mode. This means the fan only can
be adjusted via the UP / DOWN arrows.
• THERM - Thermostat mode will control the unit via a
temperature sensor. Set the comfort level and the unit will
automatically increase or decrease according to demand. The
comfort level can be adjusted using the UP / DOWN arrows to
increase or decrease the amount of cooling required.
• ECON – Economy is not displayed, as it is a central heating
function only.