beautypg.com

Bonaire Touchpad Control (LV) - Tekelek User Manual

Page 21

background image

Touch Pad Control

Setup & Commissioning

TEK600 Series Control

Page 21

Setting the Water Management Systems Parameters and values
To enter into the installer setup mode the water management

options the following steps must be followed.

STEP 1

Ensure the control is in the OFF mode.

STEP 2

A series of unseen icons must be pressed

1. Press and hold the ZONE 4 icon

allowing for a BUZZ followed by a BEEP.

2. In quick succession press the unseen

APPLIANCE COOL icon followed by the

HEAT icon.

3. If successfully executed the clock LEDs

will display tP:01.

4. If unsuccessful repeat 1 and 2 of STEP

2.

STEP 3

Using the

select the LED display

changed to E:_ _.

STEP 4

Press ENTER. The display will now change to 1:01.

STEP 5

Using the

select the parameter to be changed. Press ENTER.

STEP 6

Using the

change the value as per the table on page 20. Press ENTER.

STEP 7

To change more water management parameters repeat Step 4 – 7.

STEP 8

Press FINISH to exit.