Bleed off, Pump, Water distribution – Bonaire Touchpad Control (LV) - Tekelek User Manual
Page 28: Leed, Ater, Istribution

Touch Pad Control
Unit Maintenance
TEK600 Series Control
Page 28
Bleed Off
The bleed rate should be checked to ensure it is adequate and that there is no build up of mineral deposits
in or on your air conditioner. White deposits indicate high mineral content and the Bleed Rate should be
increased. If it is at maximum and the deposits are still forming, then more regular maintenance is required.
Pump
Check the pump spins freely and that the strainer is clean.
Water Distribution
Check the water distribution system for blockage. Check the delivery tube for kinks or holes. Check that the
clamps are secure and in place.