Austin Hughes Fan Unit & ICM-02 - Manual (Page 48)

www.austin-hughes.com UM-ICM-02-Q215V1 P.43
Part VII. SNMP
Step 5
. Select the SNMP from the left navigation
Step 6 . The SNMP Settings window appears as below:
Step 7 . Click “ Enable “ in “ SNMP Agent “ to start the SNMP agent service
Step 8 . Input “ Read Community “. Default is “ public ”
Step 9 . Input “ Write Community “. Default is “ private ”
Step 10
. Select “ disabled “ or “ V2Trap “ in “ SNMP Traps “
If select “ V2Trap “ , please input IP address of the SNMP management station in “ Station IP: “
Step 11
. Click “ Apply “ to fi nish the SNMP settings