Austin Hughes Fan Unit & ICM-02 - Manual (Page 36)

www.austin-hughes.com UM-ICM-02-Q215V1 P.31
< 4.1 > System setup
In < Setup > page, administrator can activate max. 30 Master IP groups & set the group command
password
Step 1. “ Activate “ Master IP group 01
Step 2.
Input “ IP address “ & “ password “ of the Master IP group 01
Step 3.
“ Enable “ Command password
Step 4.
Input “ New command password ”. Default is “ 00000000 “
Step 5.
Input new command password in “ Confi rm new password “ again.
Step 6. Click “ Apply “ to fi nish the Master IP group setup
Step 7.
Repeat step 1 to 6 for other Master IP groups if necessary