AMT Datasouth Fastmark 4000 - Manual (Page 60)

User's Guide 59
Command Description Parameter
d1,hadj Set horizontal position
adjustment** hadj: adjustment in dots.
d2,hadj Set horizontal position
adjustment same as d1, except it is no saved to
E2PROM
Notes:
1.
x and y represent horizontal and vertical coordinate values.
2.
hm and vm stand for horizontal and vertical multipliers.
3.
rot is the rotation direction, its value is from 0 to 3.
4.
nr is either N for normal printing or R for reverse printing.
5.
string is bracket by double quote marks, e.g. “text”.
6.
**
Commands will cause the printer to save parameters to permanent storage
(E2PROM).
7. ZS takes effect only if flash memory board is installed.