AMT Datasouth Fastmark 4000 - Manual (Page 22)

User's Guide 21
10. Slide the green Outside Media Guide off the Front and Back Media Rails by pulling
straight out.
Figure 15 - Outside Media Guide
11. Thread the media over the Back Media Rail and under the Front Media Rail.
12. Continue feeding the media through the black Upper and Lower Media Sensor Arms
located under the print module.
13. Place the green Outside Media Guide (smooth side in) back onto the Front and Back
Media Rails.
14. Slide the Outside Media Guide towards the center of the printer until it just touches but
does not buckle the media.
Back Media Rail
Front Media Rail
Outside Media Guide