AMT Datasouth Fastmark 4000 - Manual (Page 36)

User's Guide 35
Buttons
Depending upon the printer model and current mode, the Front Panel buttons serve multiple
functions. Refer to the following tables for their specific functions.
Pressed and held down during Power UP
Upon completion of the desired function the printer will go into a READY condition.
Button Function
m FEED The printer performs an internal Self-Test and prints a
Configuration Report.
The FM4602/4603 models display "SELF TESTING" on the
LCD display.
m PAUSE The printer will do a Label Sensor Calibration test on the current
loaded media.
The FM4602/4603 models display "CALIBRATION" on the LCD
display.
m CANCEL The printer will reset the Non-Volatile memory (E2PROM) back
to factory defaults.
The FM4602/4603 models display "E2PROM RESET" on the
LCD display.